Bathtub Repair Tips

The tub is among the most essential things for a working professional (and that professional’s partner). Proper maintenance is a great thing for all and that features your bathtub as well. Have you got a surface crack that requires filled? If you have an iron tub, is part of it rusting? Do you have a chip in the bathtub? How about a leaky faucet? The nice part about each of these matters is that they’re all simple repairs which you can do yourself.

Rust Removal

5Let’s begin with the easiest. You’ll need some lemon juice and salt. Combine the two together and set it to the rust. If you can, allow the mixture sit in the rust for a day to let it work, occasionally refreshing the lemon juice with a little water. After it’s sat for the day, blot this up using the material and get as much of the rust up as you’re able to. This should help eliminate the problem.

If it doesn’t, you can even change to dish soap. You’ll want 1/4 of a teaspoon of soap to a cup of water. Let this one sit for 5-10 minutes and blot it upward as well. Hopefully, that can work very well for you. If that doesn’t work either, you may also use ammonia (2 tbsps to 4 cups of water) and see if this works. If not one of the work, you’ll find commercial rust removal products that will help.

Under no circumstances should you at all use any type of bleaching agent. Ever. Bleaches are oxidants, and oxidants cause rust. Bleaching rust will simply make it rust more.

Repairing Cracks

There are only two methods to go about this one: you can get the ingredients yourself, or you’ll find kits available on account of all of the necessary tools that you’ll need to mend the crack or chip. For simplicity’s sake we advocate the kit, but if you don’t enjoy prepackaged goods for example kits like that, here’s what you’ll want:

  • Epoxy resin
  • Wet/dry sandpaper
  • Fine grit sandpaper
  • Gel coat enamel
  • “Applicator” (even though you might call it a popsicle stick)

Wash the area of the bathtub that you’re definitely going to be repairing and make sure it is totally and entirely dry. Otherwise, this won’t work well; epoxy doesn’t stick to water. The place should be smooth. Sand it down as much as possible to be sure that all of the sections of the chip or fracture are smooth to the touch. If you have a power grinder (as well as the knowhow to utilize it properly), this job is much easier. That smoothness is crucial to your repair you’ll never notice.

From there, prepare and set the epoxy to the crack utilizing the popsicle stick. You’re obviously aiming for a level, smooth finish; it’ll be a little rough, but do the best that you can with everything you’ve got. Should you take action right, you’ll have a good-filled processor or fracture with the epoxy surface. After it dries, sand it down using the wet-dry sandpaper, then the fine grit sandpaper. This makes sure the roughness is finished and that the epoxy will probably be super smooth for the gel coat enamel. Make sure you’ve matched your gel coat enamel’s colour to your tub. If the match is perfect, you’ll never begin to see the repair. In the event your bath is porcelain, the repair methods are basically exactly the same except that you’ll be using enamel paint as an alternative to gel coat.

These are just a few tips, and hopefully they help you with small repairs around the restroom. Nevertheless, if you’re unable to handle these bathtub repairs Raleigh NC or there’s something else causing you issues in your bathroom, make sure to give Specialized Refinishing  a call.

Leave a Reply

Your email address will not be published. Required fields are marked *